]> gitweb @ CieloNegro.org - Lucu.git/blobdiff - Network/HTTP/Lucu/Resource.hs
Make use of mimeType quasi-quoter.
[Lucu.git] / Network / HTTP / Lucu / Resource.hs
index 08fb6f19ce50b434457d42f0deef09710f6c31f1..704feda9c79ca2e5ab4619b1550166bdd8023f4c 100644 (file)
@@ -1,9 +1,15 @@
-{-# OPTIONS_HADDOCK prune #-}
-
--- |This is the Resource Monad; monadic actions to define the behavior
--- of each resources. The 'Resource' Monad is a kind of 'Prelude.IO'
--- Monad thus it implements 'Control.Monad.Trans.MonadIO' class. It is
--- also a state machine.
+{-# LANGUAGE
+    BangPatterns
+  , GeneralizedNewtypeDeriving
+  , DoAndIfThenElse
+  , OverloadedStrings
+  , QuasiQuotes
+  , RecordWildCards
+  , UnicodeSyntax
+  #-}
+-- |This is the Resource Monad; monadic actions to define a behavior
+-- of resource. The 'Resource' Monad is a kind of 'IO' Monad thus it
+-- implements 'MonadIO' class, and it is a state machine as well.
 -- 
 -- Request Processing Flow:
 --
@@ -12,9 +18,9 @@
 --   2. If the URI of it matches to any resource, the corresponding
 --      'Resource' Monad starts running on a newly spawned thread.
 --
---   3. The 'Resource' Monad looks at the request header, find (or not
---      find) an entity, receive the request body (if any), decide the
---      response header, and decide the response body. This process
+--   3. The 'Resource' Monad looks at request headers, find (or not
+--      find) an entity, receive the request body (if any), send
+--      response headers, and then send a response body. This process
 --      will be discussed later.
 --
 --   4. The 'Resource' Monad and its thread stops running. The client
 -- /Examining Request/ and the final state is /Done/.
 --
 --   [/Examining Request/] In this state, a 'Resource' looks at the
---   request header and thinks about an entity for it. If there is a
---   suitable entity, the 'Resource' tells the system an entity tag
---   and its last modification time ('foundEntity'). If it found no
---   entity, it tells the system so ('foundNoEntity'). In case it is
---   impossible to decide the existence of entity, which is a typical
---   case for POST requests, 'Resource' does nothing in this state.
+--   request header fields and thinks about the corresponding entity
+--   for it. If there is a suitable entity, the 'Resource' tells the
+--   system an entity tag and its last modification time
+--   ('foundEntity'). If it found no entity, it tells the system so
+--   ('foundNoEntity'). In case it is impossible to decide the
+--   existence of entity, which is a typical case for POST requests,
+--   'Resource' does nothing in this state.
 --
---   [/Getting Body/] A 'Resource' asks the system to receive a
---   request body from client. Before actually reading from the
+--   [/Receiving Body/] A 'Resource' asks the system to receive a
+--   request body from the client. Before actually reading from the
 --   socket, the system sends \"100 Continue\" to the client if need
 --   be. When a 'Resource' transits to the next state without
---   receiving all or part of request body, the system still reads it
---   and just throws it away.
+--   receiving all or part of a request body, the system automatically
+--   discards it.
 --
---   [/Deciding Header/] A 'Resource' makes a decision of status code
---   and response header. When it transits to the next state, the
---   system checks the validness of response header and then write
---   them to the socket.
+--   [/Deciding Header/] A 'Resource' makes a decision of response
+--   status code and header fields. When it transits to the next
+--   state, the system validates and completes the header fields and
+--   then sends them to the client.
 --
---   [/Deciding Body/] In this state, a 'Resource' asks the system to
+--   [/Sending Body/] In this state, a 'Resource' asks the system to
 --   write some response body to the socket. When it transits to the
 --   next state without writing any response body, the system
---   completes it depending on the status code.
+--   automatically completes it depending on the status code. (To be
+--   exact, such completion only occurs when the 'Resource' transits
+--   to this state without even declaring the \"Content-Type\" header
+--   field. See: 'setContentType')
 --
 --   [/Done/] Everything is over. A 'Resource' can do nothing for the
 --   HTTP interaction anymore.
 -- the entire request before starting 'Resource', nor we don't want to
 -- postpone writing the entire response till the end of 'Resource'
 -- computation.
-
 module Network.HTTP.Lucu.Resource
     (
     -- * Types
       Resource
+    , ResourceDef(..)
+    , emptyResource
     , FormData(..)
-    , runRes -- private
-
-    -- * Actions
 
-    -- ** Getting request header
-
-    -- |These actions can be computed regardless of the current state,
-    -- and they don't change the state.
+    -- * Getting request header
+    -- |These functions can be called regardless of the current state,
+    -- and they don't change the state of 'Resource'.
     , getConfig
     , getRemoteAddr
     , getRemoteAddr'
@@ -90,893 +97,585 @@ module Network.HTTP.Lucu.Resource
     , getContentType
     , getAuthorization
 
-    -- ** Finding an entity
-
-    -- |These actions can be computed only in the /Examining Request/
-    -- state. After the computation, the 'Resource' transits to
-    -- /Getting Body/ state.
+    -- * Finding an entity
+    -- |These functions can be called only in the /Examining Request/
+    -- state. They make the 'Resource' transit to the /Receiving Body/
+    -- state.
     , foundEntity
     , foundETag
     , foundTimeStamp
     , foundNoEntity
-
-    -- ** Getting a request body
-
-    -- |Computation of these actions changes the state to /Getting
-    -- Body/.
-    , input
-    , inputChunk
-    , inputLBS
-    , inputChunkLBS
-    , inputForm
-    , defaultLimit
-
-    -- ** Setting response headers
-    
-    -- |Computation of these actions changes the state to /Deciding
-    -- Header/.
+    , foundNoEntity'
+
+    -- * Receiving a request body
+    -- |These functions make the 'Resource' transit to the /Receiving
+    -- Body/ state.
+    , getChunk
+    , getChunks
+    , getForm
+
+    -- * Declaring response status and header fields
+    -- |These functions can be called at any time before transiting to
+    -- the /Sending Body/ state, but they themselves never causes any
+    -- state transitions.
     , setStatus
-    , setHeader
     , redirect
     , setContentType
-    , setLocation
     , setContentEncoding
     , setWWWAuthenticate
 
-    -- ** Writing a response body
+    -- ** Less frequently used functions
+    , setLocation
+    , setHeader
+    , deleteHeader
 
-    -- |Computation of these actions changes the state to /Deciding
-    -- Body/.
-    , output
-    , outputChunk
-    , outputLBS
-    , outputChunkLBS
+    -- * Sending a response body
 
-    , driftTo
+    -- |These functions make the 'Resource' transit to the
+    -- /Sending Body/ state.
+    , putChunk
+    , putChunks
+    , putBuilder
     )
     where
-
-import           Control.Concurrent.STM
-import           Control.Monad.Reader
-import qualified Data.ByteString as Strict (ByteString)
-import qualified Data.ByteString.Lazy as Lazy (ByteString)
-import qualified Data.ByteString.Char8 as C8 hiding (ByteString)
-import qualified Data.ByteString.Lazy.Char8 as L8 hiding (ByteString)
-import           Data.Char
-import           Data.List
-import           Data.Maybe
-import           Data.Time
+import Blaze.ByteString.Builder (Builder)
+import qualified Blaze.ByteString.Builder as BB
+import qualified Blaze.ByteString.Builder.Internal as BB
+import Control.Applicative
+import Control.Arrow
+import Control.Monad
+import Control.Monad.IO.Class
+import Control.Monad.Unicode
+import Data.Ascii (Ascii, CIAscii)
+import qualified Data.Ascii as A
+import qualified Data.Attoparsec.Char8 as P
+import Data.ByteString (ByteString)
+import qualified Data.ByteString as Strict
+import qualified Data.ByteString.Lazy as Lazy
+import Data.List
+import qualified Data.Map as M
+import Data.Maybe
+import Data.Monoid
+import Data.Monoid.Unicode
+import Data.Text (Text)
+import qualified Data.Text as T
+import Data.Time
 import qualified Data.Time.HTTP as HTTP
-import           Network.HTTP.Lucu.Abortion
-import           Network.HTTP.Lucu.Authorization
-import           Network.HTTP.Lucu.Config
-import           Network.HTTP.Lucu.ContentCoding
-import           Network.HTTP.Lucu.DefaultPage
-import           Network.HTTP.Lucu.ETag
+import Network.HTTP.Lucu.Abortion
+import Network.HTTP.Lucu.Authentication
+import Network.HTTP.Lucu.Config
+import Network.HTTP.Lucu.ContentCoding
+import Network.HTTP.Lucu.ETag
 import qualified Network.HTTP.Lucu.Headers as H
-import           Network.HTTP.Lucu.HttpVersion
-import           Network.HTTP.Lucu.Interaction
-import           Network.HTTP.Lucu.MultipartForm
-import           Network.HTTP.Lucu.Parser
-import           Network.HTTP.Lucu.Postprocess
-import           Network.HTTP.Lucu.Request
-import           Network.HTTP.Lucu.Response
-import           Network.HTTP.Lucu.MIMEType
-import           Network.HTTP.Lucu.Utils
-import           Network.Socket hiding (accept)
-import           Network.URI hiding (path)
-import           OpenSSL.X509
-
--- |The 'Resource' monad. This monad implements
--- 'Control.Monad.Trans.MonadIO' so it can do any 'Prelude.IO'
--- actions.
-newtype Resource a = Resource { unRes :: ReaderT Interaction IO a }
-
-instance Functor Resource where
-    fmap f c = Resource (fmap f (unRes c))
-
-instance Monad Resource where
-    c >>= f = Resource (unRes c >>= unRes . f)
-    return  = Resource . return
-    fail    = Resource . fail
-
-instance MonadIO Resource where
-    liftIO = Resource . liftIO
-
-
-runRes :: Resource a -> Interaction -> IO a
-runRes r itr
-    = runReaderT (unRes r) itr
-
-
-getInteraction :: Resource Interaction
-getInteraction = Resource ask
-
-
--- |Get the 'Network.HTTP.Lucu.Config.Config' value which is used for
--- the httpd.
-getConfig :: Resource Config
-getConfig = do itr <- getInteraction
-               return $! itrConfig itr
-
-
--- |Get the 'Network.Socket.SockAddr' of the remote host. If you want
--- a string representation instead of 'Network.Socket.SockAddr', use
--- 'getRemoteAddr''.
-getRemoteAddr :: Resource SockAddr
-getRemoteAddr = do itr <- getInteraction
-                   return $! itrRemoteAddr itr
-
+import Network.HTTP.Lucu.HttpVersion
+import Network.HTTP.Lucu.Interaction
+import Network.HTTP.Lucu.MultipartForm
+import Network.HTTP.Lucu.Parser
+import Network.HTTP.Lucu.Request
+import Network.HTTP.Lucu.Resource.Internal
+import Network.HTTP.Lucu.Response
+import Network.HTTP.Lucu.MIMEParams
+import Network.HTTP.Lucu.MIMEType (MIMEType(..))
+import qualified Network.HTTP.Lucu.MIMEType as MT
+import Network.HTTP.Lucu.MIMEType.TH
+import Network.HTTP.Lucu.Utils
+import Network.Socket hiding (accept)
+import Network.URI hiding (path)
+import Prelude.Unicode
 
 -- |Get the string representation of the address of remote host. If
--- you want a 'Network.Socket.SockAddr' instead of 'Prelude.String',
--- use 'getRemoteAddr'.
-getRemoteAddr' :: Resource String
-getRemoteAddr' = do addr          <- getRemoteAddr
-                    (Just str, _) <- liftIO $! getNameInfo [NI_NUMERICHOST] True False addr
-                    return str
+-- you want a 'SockAddr' instead of 'HostName', use 'getRemoteAddr'.
+getRemoteAddr' ∷ Resource HostName
+getRemoteAddr' = liftIO ∘ toNM =≪ getRemoteAddr
+    where
+      toNM ∷ SockAddr → IO HostName
+      toNM = (fromJust ∘ fst <$>) ∘ getNameInfo [NI_NUMERICHOST] True False
 
 -- |Resolve an address to the remote host.
-getRemoteHost :: Resource String
-getRemoteHost = do addr          <- getRemoteAddr
-                   (Just str, _) <- liftIO $! getNameInfo [] True False addr
-                   return str
+getRemoteHost ∷ Resource (Maybe HostName)
+getRemoteHost = liftIO ∘ getHN =≪ getRemoteAddr
+    where
+      getHN ∷ SockAddr → IO (Maybe HostName)
+      getHN = (fst <$>) ∘ getNameInfo [] True False
 
--- | Return the X.509 certificate of the client, or 'Nothing' if:
---
---   * This request didn't came through an SSL stream.
---
---   * The client didn't send us its certificate.
---
---   * The 'OpenSSL.Session.VerificationMode' of
---     'OpenSSL.Session.SSLContext' in
---     'Network.HTTP.Lucu.Config.SSLConfig' has not been set to
---     'OpenSSL.Session.VerifyPeer'.
-getRemoteCertificate :: Resource (Maybe X509)
-getRemoteCertificate = do itr <- getInteraction
-                          return $! itrRemoteCert itr
-
--- |Get the 'Network.HTTP.Lucu.Request.Request' value which represents
--- the request header. In general you don't have to use this action.
-getRequest :: Resource Request
-getRequest = do itr <- getInteraction
-                req <- liftIO $! atomically $! readItr itr itrRequest fromJust
-                return req
-
--- |Get the 'Network.HTTP.Lucu.Request.Method' value of the request.
-getMethod :: Resource Method
-getMethod = do req <- getRequest
-               return $! reqMethod req
+-- |Get the 'Method' value of the request.
+getMethod ∷ Resource Method
+getMethod = reqMethod <$> getRequest
 
 -- |Get the URI of the request.
-getRequestURI :: Resource URI
-getRequestURI = do req <- getRequest
-                   return $! reqURI req
+getRequestURI ∷ Resource URI
+getRequestURI = reqURI <$> getRequest
 
 -- |Get the HTTP version of the request.
-getRequestVersion :: Resource HttpVersion
-getRequestVersion = do req <- getRequest
-                       return $! reqVersion req
-
--- |Get the path of this 'Resource' (to be exact,
--- 'Network.HTTP.Lucu.Resource.Tree.ResourceDef') in the
--- 'Network.HTTP.Lucu.Resource.Tree.ResTree'. The result of this
--- action is the exact path in the tree even if the
--- 'Network.HTTP.Lucu.Resource.Tree.ResourceDef' is greedy.
---
--- Example:
+getRequestVersion ∷ Resource HttpVersion
+getRequestVersion = reqVersion <$> getRequest
+
+-- |This is an analogy of CGI PATH_INFO. 'getPathInfo' always returns
+-- @[]@ if the corresponding
+-- 'Network.HTTP.Lucu.Resource.Tree.ResourceDef' is not greedy. See:
+-- 'getResourcePath'
 --
--- > main = let tree = mkResTree [ (["foo"], resFoo) ]
--- >        in runHttpd defaultConfig tree
--- >
--- > resFoo = ResourceDef {
--- >     resIsGreedy = True
--- >   , resGet = Just $ do requestURI   <- getRequestURI
--- >                        resourcePath <- getResourcePath
--- >                        pathInfo     <- getPathInfo
--- >                        -- uriPath requestURI == "/foo/bar/baz"
--- >                        -- resourcePath       == ["foo"]
--- >                        -- pathInfo           == ["bar", "baz"]
--- >                        ...
--- >   , ...
--- >   }
-getResourcePath :: Resource [String]
-getResourcePath = do itr <- getInteraction
-                     return $! fromJust $! itrResourcePath itr
-
-
--- |This is an analogy of CGI PATH_INFO. The result is
--- URI-unescaped. It is always @[]@ if the
--- 'Network.HTTP.Lucu.Resource.Tree.ResourceDef' is not greedy. See
--- 'getResourcePath'.
-getPathInfo :: Resource [String]
-getPathInfo = do rsrcPath <- getResourcePath
-                 uri      <- getRequestURI
-                 let reqPathStr = uriPath uri
-                     reqPath    = [unEscapeString x | x <- splitBy (== '/') reqPathStr, x /= ""]
-                 -- rsrcPath と reqPath の共通する先頭部分を reqPath か
-                 -- ら全部取り除くと、それは PATH_INFO のやうなものにな
-                 -- る。rsrcPath は全部一致してゐるに決まってゐる(でな
-                 -- ければこの Resource が撰ばれた筈が無い)ので、
-                 -- rsrcPath の長さの分だけ削除すれば良い。
-                 return $! drop (length rsrcPath) reqPath
-
--- | Assume the query part of request URI as
--- application\/x-www-form-urlencoded, and parse it. This action
--- doesn't parse the request body. See 'inputForm'.
-getQueryForm :: Resource [FormData]
-getQueryForm = do uri <- getRequestURI
-                  return $! map pairToFormData $ parseWWWFormURLEncoded $ snd $ splitAt 1 $ uriQuery uri
-
-pairToFormData :: (String, String) -> FormData
-pairToFormData (name, value)
-    = FormData {
-        fdName     = name
-      , fdFileName = Nothing
-      , fdContent  = L8.pack value
-      }
-
--- |Get a value of given request header. Comparison of header name is
--- case-insensitive. Note that this action is not intended to be used
--- so frequently: there should be actions like 'getContentType' for
--- every common headers.
-getHeader :: Strict.ByteString -> Resource (Maybe Strict.ByteString)
-getHeader name = name `seq`
-                 do req <- getRequest
-                    return $! H.getHeader name req
-
--- |Get a list of 'Network.HTTP.Lucu.MIMEType.MIMEType' enumerated on
--- header \"Accept\".
-getAccept :: Resource [MIMEType]
-getAccept = do acceptM <- getHeader (C8.pack "Accept")
-               case acceptM of
-                 Nothing 
-                     -> return []
-                 Just accept
-                     -> case parse mimeTypeListP (L8.fromChunks [accept]) of
-                          (# Success xs, _ #) -> return xs
-                          (# _         , _ #) -> abort BadRequest []
-                                                 (Just $ "Unparsable Accept: " ++ C8.unpack accept)
-
--- |Get a list of @(contentCoding, qvalue)@ enumerated on header
--- \"Accept-Encoding\". The list is sorted in descending order by
--- qvalue.
-getAcceptEncoding :: Resource [(String, Maybe Double)]
+-- Note that the returned path components are URI-decoded.
+getPathInfo ∷ Resource [Strict.ByteString]
+getPathInfo = do rsrcPath ← getResourcePath
+                 reqPath  ← splitPathInfo <$> getRequestURI
+                 return $ drop (length rsrcPath) reqPath
+
+-- |Assume the query part of request URI as
+-- application\/x-www-form-urlencoded, and parse it into pairs of
+-- @(name, formData)@. This function doesn't read the request
+-- body.
+getQueryForm ∷ Resource [(Strict.ByteString, FormData)]
+getQueryForm = parse' <$> getRequestURI
+    where
+      parse' = map toPairWithFormData ∘
+               parseWWWFormURLEncoded ∘
+               fromJust ∘
+               A.fromChars ∘
+               drop 1 ∘
+               uriQuery
+
+toPairWithFormData ∷ (ByteString, ByteString) → (Strict.ByteString, FormData)
+toPairWithFormData (name, value)
+    = let fd = FormData {
+                 fdFileName = Nothing
+               , fdMIMEType = [mimeType| text/plain |]
+               , fdContent  = Lazy.fromChunks [value]
+               }
+      in (name, fd)
+
+-- |@'getHeader' name@ returns the value of the request header field
+-- @name@. Comparison of header name is case-insensitive. Note that
+-- this function is not intended to be used so frequently: there
+-- should be functions like 'getContentType' for every common headers.
+getHeader ∷ CIAscii → Resource (Maybe Ascii)
+getHeader name
+    = H.getHeader name <$> getRequest
+
+-- |Return the list of 'MIMEType' enumerated on the value of request
+-- header \"Accept\", or @[]@ if absent.
+getAccept ∷ Resource [MIMEType]
+getAccept
+    = do acceptM ← getHeader "Accept"
+         case acceptM of
+           Nothing
+               → return []
+           Just accept
+               → case P.parseOnly (finishOff MT.mimeTypeList) (A.toByteString accept) of
+                    Right xs → return xs
+                    Left  _  → abort $ mkAbortion' BadRequest
+                                     $ "Unparsable Accept: " ⊕ A.toText accept
+
+-- |Return the list of @(contentCoding, qvalue)@ enumerated on the
+-- value of request header \"Accept-Encoding\". The list is sorted in
+-- descending order by qvalue.
+getAcceptEncoding ∷ Resource [(CIAscii, Maybe Double)]
 getAcceptEncoding
-    = do accEncM <- getHeader (C8.pack "Accept-Encoding")
+    = do accEncM ← getHeader "Accept-Encoding"
          case accEncM of
            Nothing
                -- HTTP/1.0 には Accept-Encoding が無い場合の規定が無い
                -- ので安全の爲 identity が指定された事にする。HTTP/1.1
                -- の場合は何でも受け入れて良い事になってゐるので "*" が
                -- 指定された事にする。
-               -> do ver <- getRequestVersion
-                     case ver of
-                       HttpVersion 1 0 -> return [("identity", Nothing)]
-                       HttpVersion 1 1 -> return [("*"       , Nothing)]
-                       _               -> undefined
-           Just value
-               -> if C8.null value then
+               → do ver ← getRequestVersion
+                    case ver of
+                      HttpVersion 1 0 → return [("identity", Nothing)]
+                      HttpVersion 1 1 → return [("*"       , Nothing)]
+                      _               → abort $ mkAbortion' InternalServerError
+                                                "getAcceptEncoding: unknown HTTP version"
+           Just ae
+               → if ae ≡ "" then
                       -- identity のみが許される。
                       return [("identity", Nothing)]
-                  else
-                      case parse acceptEncodingListP (L8.fromChunks [value]) of
-                        (# Success x, _ #) -> return $ reverse $ sortBy orderAcceptEncodings x
-                        (# _        , _ #) -> abort BadRequest []
-                                              (Just $ "Unparsable Accept-Encoding: " ++ C8.unpack value)
-
--- |Check whether a given content-coding is acceptable.
-isEncodingAcceptable :: String -> Resource Bool
-isEncodingAcceptable coding
-    = do accList <- getAcceptEncoding
-         return (flip any accList $ \ (c, q) ->
-                     (c == "*" || C8.pack c `H.noCaseEq` C8.pack coding) && q /= Just 0)
-
-
--- |Get the header \"Content-Type\" as
--- 'Network.HTTP.Lucu.MIMEType.MIMEType'.
-getContentType :: Resource (Maybe MIMEType)
+                 else
+                     case P.parseOnly (finishOff acceptEncodingList) (A.toByteString ae) of
+                       Right xs → return $ map toTuple $ reverse $ sort xs
+                       Left  _  → abort $ mkAbortion' BadRequest
+                                        $ "Unparsable Accept-Encoding: " ⊕ A.toText ae
+    where
+      toTuple (AcceptEncoding {..})
+          = (aeEncoding, aeQValue)
+
+-- |Return 'True' iff a given content-coding is acceptable by the
+-- client.
+isEncodingAcceptable ∷ CIAscii → Resource Bool
+isEncodingAcceptable encoding = any doesMatch <$> getAcceptEncoding
+    where
+      doesMatch ∷ (CIAscii, Maybe Double) → Bool
+      doesMatch (e, q) = (e ≡ "*" ∨ e ≡ encoding) ∧ q ≢ Just 0
+
+-- |Return the value of request header \"Content-Type\" as 'MIMEType'.
+getContentType ∷ Resource (Maybe MIMEType)
 getContentType
-    = do cTypeM <- getHeader (C8.pack "Content-Type")
+    = do cTypeM ← getHeader "Content-Type"
          case cTypeM of
            Nothing
-               -> return Nothing
+                return Nothing
            Just cType
-               -> case parse mimeTypeP (L8.fromChunks [cType]) of
-                    (# Success t, _ #) -> return $ Just t
-                    (# _        , _ #) -> abort BadRequest []
-                                          (Just $ "Unparsable Content-Type: " ++ C8.unpack cType)
-
-
--- |Get the header \"Authorization\" as
--- 'Network.HTTP.Lucu.Authorization.AuthCredential'.
-getAuthorization :: Resource (Maybe AuthCredential)
+               → case P.parseOnly (finishOff MT.mimeType) (A.toByteString cType) of
+                    Right t → return $ Just t
+                    Left  _ → abort $ mkAbortion' BadRequest
+                                    $ "Unparsable Content-Type: " ⊕ A.toText cType
+
+-- |Return the value of request header \"Authorization\" as
+-- 'AuthCredential'.
+getAuthorization ∷ Resource (Maybe AuthCredential)
 getAuthorization
-    = do authM <- getHeader (C8.pack "Authorization")
+    = do authM ← getHeader "Authorization"
          case authM of
            Nothing
-               -> return Nothing
+                return Nothing
            Just auth
-               -> case parse authCredentialP (L8.fromChunks [auth]) of
-                    (# Success a, _ #) -> return $ Just a
-                    (# _        , _ #) -> return Nothing
-
-
-{- ExaminingRequest 時に使用するアクション群 -}
+               → case P.parseOnly (finishOff authCredential) (A.toByteString auth) of
+                    Right ac → return $ Just ac
+                    Left  _  → return Nothing
 
 -- |Tell the system that the 'Resource' found an entity for the
 -- request URI. If this is a GET or HEAD request, a found entity means
 -- a datum to be replied. If this is a PUT or DELETE request, it means
--- a datum which was stored for the URI up to now. It is an error to
--- compute 'foundEntity' if this is a POST request.
+-- a datum which was stored for the URI until now. For POST requests
+-- it raises an error.
 --
--- Computation of 'foundEntity' performs \"If-Match\" test or
--- \"If-None-Match\" test if possible. When those tests fail, the
--- computation of 'Resource' immediately aborts with status \"412
--- Precondition Failed\" or \"304 Not Modified\" depending on the
--- situation.
+-- 'foundEntity' performs \"If-Match\" test or \"If-None-Match\" test
+-- whenever possible, and if those tests fail, it immediately aborts
+-- with status \"412 Precondition Failed\" or \"304 Not Modified\"
+-- depending on the situation.
 --
--- If this is a GET or HEAD request, 'foundEntity' automatically puts
--- \"ETag\" and \"Last-Modified\" headers into the response.
-foundEntity :: ETag -> UTCTime -> Resource ()
+-- If the request method is either GET or HEAD, 'foundEntity'
+-- automatically puts \"ETag\" and \"Last-Modified\" headers into the
+-- response.
+foundEntity ∷ ETag → UTCTime → Resource ()
 foundEntity tag timeStamp
-    = tag `seq` timeStamp `seq`
-      do driftTo ExaminingRequest
-
-         method <- getMethod
-         when (method == GET || method == HEAD)
-                  $ setHeader' (C8.pack "Last-Modified") (C8.pack $ HTTP.format timeStamp)
-         when (method == POST)
-                  $ abort InternalServerError []
-                        (Just "Illegal computation of foundEntity for POST request.")
+    = do driftTo ExaminingRequest
+
+         method ← getMethod
+         when (method ≡ GET ∨ method ≡ HEAD)
+             $ setHeader "Last-Modified" (HTTP.toAscii timeStamp)
+         when (method ≡ POST)
+             $ abort
+             $ mkAbortion' InternalServerError
+               "foundEntity: this is a POST request."
          foundETag tag
 
-         driftTo GettingBody
+         driftTo ReceivingBody
 
 -- |Tell the system that the 'Resource' found an entity for the
 -- request URI. The only difference from 'foundEntity' is that
--- 'foundETag' doesn't (and can't) put \"Last-Modified\" header into
+-- 'foundETag' doesn't (nor can't) put \"Last-Modified\" header into
 -- the response.
 --
--- This action is not preferred. You should use 'foundEntity' whenever
--- possible.
-foundETag :: ETag -> Resource ()
+-- Using this function is discouraged. You should use 'foundEntity'
+-- whenever possible.
+foundETag ∷ ETag → Resource ()
 foundETag tag
-    = tag `seq`
-      do driftTo ExaminingRequest
+    = do driftTo ExaminingRequest
       
-         method <- getMethod
-         when (method == GET || method == HEAD)
-                  $ setHeader' (C8.pack "ETag") (C8.pack $ show tag)
-         when (method == POST)
-                  $ abort InternalServerError []
-                        (Just "Illegal computation of foundETag for POST request.")
+         method ← getMethod
+         when (method ≡ GET ∨ method ≡ HEAD)
+             $ setHeader "ETag"
+             $ A.fromAsciiBuilder
+             $ printETag tag
+         when (method ≡ POST)
+             $ abort
+             $ mkAbortion' InternalServerError
+               "Illegal computation of foundETag for POST request."
 
          -- If-Match があればそれを見る。
-         ifMatch <- getHeader (C8.pack "If-Match")
+         ifMatch ← getHeader "If-Match"
          case ifMatch of
-           Nothing    -> return ()
-           Just value -> if value == C8.pack "*" then
-                             return ()
-                         else
-                             case parse eTagListP (L8.fromChunks [value]) of
-                               (# Success tags, _ #)
-                                 -- tags の中に一致するものが無ければ
-                                 -- PreconditionFailed で終了。
-                                 -> when (not $ any (== tag) tags)
-                                    $ abort PreconditionFailed []
-                                          $! Just ("The entity tag doesn't match: " ++ C8.unpack value)
-                               (# _, _ #)
-                                   -> abort BadRequest [] $! Just ("Unparsable If-Match: " ++ C8.unpack value)
-
-         let statusForNoneMatch = if method == GET || method == HEAD then
-                                      NotModified
-                                  else
-                                      PreconditionFailed
+           Nothing
+               → return ()
+           Just value
+               → if value ≡ "*" then
+                      return ()
+                  else
+                      case P.parseOnly (finishOff eTagList) (A.toByteString value) of
+                        Right tags
+                            -- tags の中に一致するものが無ければ
+                            -- PreconditionFailed で終了。
+                            → when ((¬) (any (≡ tag) tags))
+                                  $ abort
+                                  $ mkAbortion' PreconditionFailed
+                                  $ "The entity tag doesn't match: " ⊕ A.toText value
+                        Left _
+                            → abort $ mkAbortion' BadRequest
+                                    $ "Unparsable If-Match: " ⊕ A.toText value
+
+         let statusForNoneMatch
+                 = if method ≡ GET ∨ method ≡ HEAD then
+                       NotModified
+                   else
+                       PreconditionFailed
 
          -- If-None-Match があればそれを見る。
-         ifNoneMatch <- getHeader (C8.pack "If-None-Match")
+         ifNoneMatch ← getHeader "If-None-Match"
          case ifNoneMatch of
-           Nothing    -> return ()
-           Just value -> if value == C8.pack "*" then
-                             abort statusForNoneMatch [] $! Just ("The entity tag matches: *")
-                         else
-                             case parse eTagListP (L8.fromChunks [value]) of
-                               (# Success tags, _ #)
-                                   -> when (any (== tag) tags)
-                                      $ abort statusForNoneMatch [] $! Just ("The entity tag matches: " ++ C8.unpack value)
-                               (# _, _ #)
-                                   -> abort BadRequest [] $! Just ("Unparsable If-None-Match: " ++ C8.unpack value)
-
-         driftTo GettingBody
+           Nothing
+               → return ()
+           Just value
+               → if value ≡ "*" then
+                      abort $ mkAbortion' statusForNoneMatch
+                            $ "The entity tag matches: *"
+                  else
+                      case P.parseOnly (finishOff eTagList) (A.toByteString value) of
+                        Right tags
+                            → when (any (≡ tag) tags)
+                                  $ abort
+                                  $ mkAbortion' statusForNoneMatch
+                                  $ "The entity tag matches: " ⊕ A.toText value
+                        Left _
+                            → abort $ mkAbortion' BadRequest
+                                    $ "Unparsable If-None-Match: " ⊕ A.toText value
+
+         driftTo ReceivingBody
 
 -- |Tell the system that the 'Resource' found an entity for the
 -- request URI. The only difference from 'foundEntity' is that
 -- 'foundTimeStamp' performs \"If-Modified-Since\" test or
 -- \"If-Unmodified-Since\" test instead of \"If-Match\" test or
--- \"If-None-Match\" test. Be aware that any tests based on last
+-- \"If-None-Match\" test. Be aware that any tests based on last
 -- modification time are unsafe because it is possible to mess up such
 -- tests by modifying the entity twice in a second.
 --
--- This action is not preferred. You should use 'foundEntity' whenever
--- possible.
-foundTimeStamp :: UTCTime -> Resource ()
+-- Using this function is discouraged. You should use 'foundEntity'
+-- whenever possible.
+foundTimeStamp ∷ UTCTime → Resource ()
 foundTimeStamp timeStamp
-    = timeStamp `seq`
-      do driftTo ExaminingRequest
-
-         method <- getMethod
-         when (method == GET || method == HEAD)
-                  $ setHeader' (C8.pack "Last-Modified") (C8.pack $ HTTP.format timeStamp)
-         when (method == POST)
-                  $ abort InternalServerError []
-                        (Just "Illegal computation of foundTimeStamp for POST request.")
-
-         let statusForIfModSince = if method == GET || method == HEAD then
-                                       NotModified
-                                   else
-                                       PreconditionFailed
+    = do driftTo ExaminingRequest
+
+         method ← getMethod
+         when (method ≡ GET ∨ method ≡ HEAD)
+             $ setHeader "Last-Modified" (HTTP.toAscii timeStamp)
+         when (method ≡ POST)
+             $ abort
+             $ mkAbortion' InternalServerError
+               "Illegal computation of foundTimeStamp for POST request."
+
+         let statusForIfModSince
+                 = if method ≡ GET ∨ method ≡ HEAD then
+                       NotModified
+                   else
+                       PreconditionFailed
 
          -- If-Modified-Since があればそれを見る。
-         ifModSince <- getHeader (C8.pack "If-Modified-Since")
+         ifModSince ← getHeader "If-Modified-Since"
          case ifModSince of
-           Just str -> case HTTP.parse (C8.unpack str) of
-                         Just lastTime
-                             -> when (timeStamp <= lastTime)
-                                $ abort statusForIfModSince []
-                                      $! Just ("The entity has not been modified since " ++ C8.unpack str)
-                         Nothing
-                             -> return () -- 不正な時刻は無視
-           Nothing  -> return ()
+           Just str → case HTTP.fromAscii str of
+                         Right lastTime
+                             → when (timeStamp ≤ lastTime)
+                               $ abort
+                               $ mkAbortion' statusForIfModSince
+                               $ "The entity has not been modified since " ⊕ A.toText str
+                         Left _
+                             → return () -- 不正な時刻は無視
+           Nothing  → return ()
 
          -- If-Unmodified-Since があればそれを見る。
-         ifUnmodSince <- getHeader (C8.pack "If-Unmodified-Since")
+         ifUnmodSince ← getHeader "If-Unmodified-Since"
          case ifUnmodSince of
-           Just str -> case HTTP.parse (C8.unpack str) of
-                         Just lastTime
-                             -> when (timeStamp > lastTime)
-                                $ abort PreconditionFailed []
-                                      $! Just  ("The entity has not been modified since " ++ C8.unpack str)
-                         Nothing
-                             -> return () -- 不正な時刻は無視
-           Nothing  -> return ()
-
-         driftTo GettingBody
-
--- | Computation of @'foundNoEntity' mStr@ tells the system that the
--- 'Resource' found no entity for the request URI. @mStr@ is an
--- optional error message to be replied to the client.
+           Just str → case HTTP.fromAscii str of
+                         Right lastTime
+                             → when (timeStamp > lastTime)
+                               $ abort
+                               $ mkAbortion' PreconditionFailed
+                               $ "The entity has not been modified since " ⊕ A.toText str
+                         Left _
+                             → return () -- 不正な時刻は無視
+           Nothing  → return ()
+
+         driftTo ReceivingBody
+
+-- |@'foundNoEntity' mStr@ tells the system that the 'Resource' found
+-- no entity for the request URI. @mStr@ is an optional error message
+-- to be replied to the client.
 --
--- If this is a PUT request, 'foundNoEntity' performs \"If-Match\"
--- test and aborts with status \"412 Precondition Failed\" when it
--- failed. If this is a GET, HEAD, POST or DELETE request,
+-- If the request method is PUT, 'foundNoEntity' performs \"If-Match\"
+-- test and when that fails it aborts with status \"412 Precondition
+-- Failed\". If the request method is GET, HEAD, POST or DELETE,
 -- 'foundNoEntity' always aborts with status \"404 Not Found\".
-foundNoEntity :: Maybe String -> Resource ()
+foundNoEntity ∷ Maybe Text → Resource ()
 foundNoEntity msgM
-    = msgM `seq`
-      do driftTo ExaminingRequest
+    = do driftTo ExaminingRequest
 
-         method <- getMethod
-         when (method /= PUT)
-                  $ abort NotFound [] msgM
+         method ← getMethod
+         when (method ≢ PUT)
+             $ abort
+             $ mkAbortion NotFound [] msgM
 
          -- エンティティが存在しないと云ふ事は、"*" も含めたどのやうな
          -- If-Match: 條件も滿たさない。
-         ifMatch <- getHeader (C8.pack "If-Match")
-         when (ifMatch /= Nothing)
-                  $ abort PreconditionFailed [] msgM
-
-         driftTo GettingBody
-
-
-{- GettingBody 時に使用するアクション群 -}
-
--- | Computation of @'input' limit@ attempts to read the request body
--- up to @limit@ bytes, and then make the 'Resource' transit to
--- /Deciding Header/ state. When the actual size of body is larger
--- than @limit@ bytes, computation of 'Resource' immediately aborts
--- with status \"413 Request Entity Too Large\". When the request has
--- no body, 'input' returns an empty string.
+         ifMatch ← getHeader "If-Match"
+         when (ifMatch ≢ Nothing)
+             $ abort
+             $ mkAbortion PreconditionFailed [] msgM
+
+         driftTo ReceivingBody
+
+-- |'foundNoEntity'' is the same as @'foundNoEntity' 'Nothing'@.
+foundNoEntity' ∷ Resource ()
+{-# INLINE foundNoEntity' #-}
+foundNoEntity' = foundNoEntity Nothing
+
+-- |@'getChunks' limit@ attemts to read the entire request body up to
+-- @limit@ bytes, and then make the 'Resource' transit to the
+-- /Deciding Header/ state. When the actual size of the body is larger
+-- than @limit@ bytes, 'getChunks' immediately aborts with status
+-- \"413 Request Entity Too Large\". When the request has no body, it
+-- returns an empty string.
 --
--- @limit@ may be less than or equal to zero. In this case, the
--- default limitation value
--- ('Network.HTTP.Lucu.Config.cnfMaxEntityLength') is used. See
--- 'defaultLimit'.
+-- When the @limit@ is 'Nothing', 'getChunks' uses the default
+-- limitation value ('cnfMaxEntityLength') instead.
 --
--- Note that 'inputLBS' is more efficient than 'input' so you should
--- use it whenever possible.
-input :: Int -> Resource String
-input limit = limit `seq`
-              inputLBS limit >>= return . L8.unpack
-
-
--- | This is mostly the same as 'input' but is more
--- efficient. 'inputLBS' returns a 'Data.ByteString.Lazy.ByteString'
--- but it's not really lazy: reading from the socket just happens at
--- the computation of 'inputLBS', not at the evaluation of the
--- 'Data.ByteString.Lazy.ByteString'. The same goes for
--- 'inputChunkLBS'.
-inputLBS :: Int -> Resource Lazy.ByteString
-inputLBS limit
-    = limit `seq`
-      do driftTo GettingBody
-         itr     <- getInteraction
-         hasBody <- liftIO $! atomically $! readItr itr itrRequestHasBody id
-         chunk   <- if hasBody then
-                        askForInput itr
-                    else
-                        do driftTo DecidingHeader
-                           return L8.empty
-         return chunk
+-- 'getChunks' returns a lazy 'Lazy.ByteString' but it's not really
+-- lazy: reading from the socket just happens at the computation of
+-- 'getChunks', not at the evaluation of the 'Lazy.ByteString'.
+getChunks ∷ Maybe Int → Resource Lazy.ByteString
+getChunks (Just n)
+    | n < 0     = fail ("getChunks: limit must not be negative: " ⧺ show n)
+    | n ≡ 0     = return (∅)
+    | otherwise = getChunks' n
+getChunks Nothing
+    = getConfig ≫= getChunks ∘ Just ∘ cnfMaxEntityLength
+
+getChunks' ∷ Int → Resource Lazy.ByteString
+getChunks' limit = go limit (∅)
     where
-      askForInput :: Interaction -> Resource Lazy.ByteString
-      askForInput itr
-          = itr `seq`
-            do let confLimit   = cnfMaxEntityLength $ itrConfig itr
-                   actualLimit = if limit <= 0 then
-                                     confLimit
-                                 else
-                                     limit
-               when (actualLimit <= 0)
-                        $ fail ("inputLBS: limit must be positive: " ++ show actualLimit)
-               -- Reader にリクエスト
-               liftIO $! atomically
-                          $! do chunkLen <- readItr itr itrReqChunkLength id
-                                writeItr itr itrWillReceiveBody True
-                                if fmap (> actualLimit) chunkLen == Just True then
-                                    -- 受信前から多過ぎる事が分かってゐる
-                                    tooLarge actualLimit
-                                  else
-                                    writeItr itr itrReqBodyWanted $ Just actualLimit
-               -- 應答を待つ。トランザクションを分けなければ當然デッドロック。
-               chunk <- liftIO $! atomically
-                        $! do chunk       <- readItr itr itrReceivedBody id
-                              chunkIsOver <- readItr itr itrReqChunkIsOver id
-                              if L8.length chunk < fromIntegral actualLimit then
-                                  -- 要求された量に滿たなくて、まだ殘り
-                                  -- があるなら再試行。
-                                  unless chunkIsOver
-                                             $ retry
-                                else
-                                  -- 制限値一杯まで讀むやうに指示したの
-                                  -- にまだ殘ってゐるなら、それは多過ぎ
-                                  -- る。
-                                  unless chunkIsOver
-                                             $ tooLarge actualLimit
-                              -- 成功。itr 内にチャンクを置いたままにす
-                              -- るとメモリの無駄になるので除去。
-                              writeItr itr itrReceivedBody L8.empty
-                              return chunk
-               driftTo DecidingHeader
-               return chunk
-
-      tooLarge :: Int -> STM ()
-      tooLarge lim = lim `seq`
-                     abortSTM RequestEntityTooLarge []
-                     $! Just ("Request body must be smaller than "
-                              ++ show lim ++ " bytes.")
-         
--- | Computation of @'inputChunk' limit@ attempts to read a part of
--- request body up to @limit@ bytes. You can read any large request by
--- repeating computation of this action. When you've read all the
--- request body, 'inputChunk' returns an empty string and then make
--- the 'Resource' transit to /Deciding Header/ state.
---
--- @limit@ may be less than or equal to zero. In this case, the
--- default limitation value
--- ('Network.HTTP.Lucu.Config.cnfMaxEntityLength') is used. See
--- 'defaultLimit'.
---
--- Note that 'inputChunkLBS' is more efficient than 'inputChunk' so you
--- should use it whenever possible.
-inputChunk :: Int -> Resource String
-inputChunk limit = limit `seq`
-                   inputChunkLBS limit >>= return . L8.unpack
-
-
--- | This is mostly the same as 'inputChunk' but is more
--- efficient. See 'inputLBS'.
-inputChunkLBS :: Int -> Resource Lazy.ByteString
-inputChunkLBS limit
-    = limit `seq`
-      do driftTo GettingBody
-         itr     <- getInteraction
-         hasBody <- liftIO $ atomically $ readItr itr itrRequestHasBody id
-         chunk   <- if hasBody then
-                        askForInput itr
+      go ∷ Int → Builder → Resource Lazy.ByteString
+      go  0  _ = do chunk ← getChunk 1
+                    if Strict.null chunk then
+                        return (∅)
                     else
-                        do driftTo DecidingHeader
-                           return L8.empty
-         return chunk
-    where
-      askForInput :: Interaction -> Resource Lazy.ByteString
-      askForInput itr
-          = itr `seq`
-            do let confLimit   = cnfMaxEntityLength $! itrConfig itr
-                   actualLimit = if limit < 0 then
-                                      confLimit
-                                  else
-                                      limit
-               when (actualLimit <= 0)
-                        $ fail ("inputChunkLBS: limit must be positive: " ++ show actualLimit)
-               -- Reader にリクエスト
-               liftIO $! atomically
-                          $! do writeItr itr itrReqBodyWanted $! Just actualLimit
-                                writeItr itr itrWillReceiveBody True
-               -- 應答を待つ。トランザクションを分けなければ當然デッドロック。
-               chunk <- liftIO $! atomically
-                        $ do chunk <- readItr itr itrReceivedBody id
-                             -- 要求された量に滿たなくて、まだ殘りがあ
-                             -- るなら再試行。
-                             when (L8.length chunk < fromIntegral actualLimit)
-                                      $ do chunkIsOver <- readItr itr itrReqChunkIsOver id
-                                           unless chunkIsOver
-                                                      $ retry
-                             -- 成功
-                             writeItr itr itrReceivedBody L8.empty
-                             return chunk
-               when (L8.null chunk)
-                        $ driftTo DecidingHeader
-               return chunk
-
--- | Computation of @'inputForm' limit@ attempts to read the request
--- body with 'input' and parse it as
--- application\/x-www-form-urlencoded or multipart\/form-data. If the
--- request header \"Content-Type\" is neither of them, 'inputForm'
--- makes 'Resource' abort with status \"415 Unsupported Media
--- Type\". If the request has no \"Content-Type\", it aborts with
--- \"400 Bad Request\".
-inputForm :: Int -> Resource [FormData]
-inputForm limit
-    = limit `seq` 
-      do cTypeM <- getContentType
+                        abort $ mkAbortion' RequestEntityTooLarge
+                              $ "Request body must be smaller than "
+                              ⊕ T.pack (show limit)
+                              ⊕ " bytes."
+      go !n !b = do c ← getChunk $ min n BB.defaultBufferSize
+                    if Strict.null c then
+                        -- Got EOF
+                        return $ BB.toLazyByteString b
+                    else
+                        do let n'  = n - Strict.length c
+                               xs' = b ⊕ BB.fromByteString c
+                           go n' xs'
+
+-- |@'getForm' limit@ attempts to read the request body with
+-- 'getChunks' and parse it as @application\/x-www-form-urlencoded@ or
+-- @multipart\/form-data@. If the request header \"Content-Type\" is
+-- neither of them, 'getForm' aborts with status \"415 Unsupported
+-- Media Type\". If the request has no \"Content-Type\", it aborts
+-- with \"400 Bad Request\".
+--
+-- Note that there are currently a few limitations on parsing
+-- @multipart/form-data@. See: 'parseMultipartFormData'
+getForm ∷ Maybe Int → Resource [(Strict.ByteString, FormData)]
+getForm limit
+    = do cTypeM ← getContentType
          case cTypeM of
            Nothing
-               -> abort BadRequest [] (Just "Missing Content-Type")
+               → abort $ mkAbortion' BadRequest "Missing Content-Type"
            Just (MIMEType "application" "x-www-form-urlencoded" _)
-               -> readWWWFormURLEncoded
+                readWWWFormURLEncoded
            Just (MIMEType "multipart" "form-data" params)
-               -> readMultipartFormData params
+                readMultipartFormData params
            Just cType
-               -> abort UnsupportedMediaType [] (Just $! "Unsupported media type: "
-                                                          ++ show cType)
+               → abort $ mkAbortion' UnsupportedMediaType
+                       $ A.toText
+                       $ A.fromAsciiBuilder
+                       $ A.toAsciiBuilder "Unsupported media type: "
+                       ⊕ MT.printMIMEType cType
     where
       readWWWFormURLEncoded
-          = do src <- input limit
-               return $ map pairToFormData $ parseWWWFormURLEncoded src
-
-      readMultipartFormData params
-          = do case find ((== "boundary") . map toLower . fst) params of
-                 Nothing
-                     -> abort BadRequest [] (Just "Missing boundary of multipart/form-data")
-                 Just (_, boundary)
-                     -> do src <- inputLBS limit
-                           case parse (multipartFormP boundary) src of
-                             (# Success fdList, _ #) -> return fdList
-                             (# _, _ #)
-                                 -> abort BadRequest [] (Just "Unparsable multipart/form-data")
-
--- | This is just a constant @-1@. It's better to say @'input'
--- 'defaultLimit'@ than to say @'input' (-1)@ but these are exactly
--- the same.
-defaultLimit :: Int
-defaultLimit = (-1)
-
-
-
-{- DecidingHeader 時に使用するアクション群 -}
-
--- | Set the response status code. If you omit to compute this action,
--- the status code will be defaulted to \"200 OK\".
-setStatus :: StatusCode -> Resource ()
-setStatus code
-    = code `seq`
-      do driftTo DecidingHeader
-         itr <- getInteraction
-         liftIO $! atomically $! updateItr itr itrResponse
-                    $! \ res -> res {
-                                  resStatus = code
-                                }
-
--- | Set a value of given resource header. Comparison of header name
--- is case-insensitive. Note that this action is not intended to be
--- used so frequently: there should be actions like 'setContentType'
--- for every common headers.
---
--- Some important headers (especially \"Content-Length\" and
--- \"Transfer-Encoding\") may be silently dropped or overwritten by
--- the system not to corrupt the interaction with client at the
--- viewpoint of HTTP protocol layer. For instance, if we are keeping
--- the connection alive, without this process it causes a catastrophe
--- to send a header \"Content-Length: 10\" and actually send a body of
--- 20 bytes long. In this case the client shall only accept the first
--- 10 bytes of response body and thinks that the residual 10 bytes is
--- a part of header of the next response.
-setHeader :: Strict.ByteString -> Strict.ByteString -> Resource ()
-setHeader name value
-    = name `seq` value `seq`
-      driftTo DecidingHeader >> setHeader' name value
-         
-
-setHeader' :: Strict.ByteString -> Strict.ByteString -> Resource ()
-setHeader' name value
-    = name `seq` value `seq`
-      do itr <- getInteraction
-         liftIO $ atomically
-                    $ updateItr itr itrResponse
-                          $ H.setHeader name value
-
--- | Computation of @'redirect' code uri@ sets the response status to
--- @code@ and \"Location\" header to @uri@. The @code@ must satisfy
--- 'Network.HTTP.Lucu.Response.isRedirection' or it causes an error.
-redirect :: StatusCode -> URI -> Resource ()
+          = (map toPairWithFormData ∘ parseWWWFormURLEncoded)
+            <$>
+            (bsToAscii =≪ getChunks limit)
+
+      bsToAscii bs
+          = case A.fromByteString (Strict.concat (Lazy.toChunks bs)) of
+              Just a  → return a
+              Nothing → abort $ mkAbortion' BadRequest "Malformed x-www-form-urlencoded"
+
+      readMultipartFormData (MIMEParams m)
+          = case M.lookup "boundary" m of
+              Nothing
+                  → abort $ mkAbortion' BadRequest "Missing boundary of multipart/form-data"
+              Just boundary
+                  → do src ← getChunks limit
+                       b   ← case A.fromText boundary of
+                                Just b  → return b
+                                Nothing → abort $ mkAbortion' BadRequest
+                                                $ "Malformed boundary: " ⊕ boundary
+                       case parseMultipartFormData b src of
+                         Right xs → return $ map (first A.toByteString) xs
+                         Left err → abort $ mkAbortion' BadRequest $ T.pack err
+
+-- |@'redirect' code uri@ declares the response status as @code@ and
+-- \"Location\" header field as @uri@. The @code@ must satisfy
+-- 'isRedirection' or it raises an error.
+redirect ∷ StatusCode → URI → Resource ()
 redirect code uri
-    = code `seq` uri `seq`
-      do when (code == NotModified || not (isRedirection code))
-                  $ abort InternalServerError []
-                        $! Just ("Attempted to redirect with status " ++ show code)
+    = do when (code ≡ NotModified ∨ not (isRedirection code))
+             $ abort
+             $ mkAbortion' InternalServerError
+             $ A.toText
+             $ A.fromAsciiBuilder
+             $ A.toAsciiBuilder "Attempted to redirect with status "
+             ⊕ printStatusCode code
          setStatus code
          setLocation uri
-{-# INLINE redirect #-}
 
+-- |@'setContentType' mType@ declares the response header
+-- \"Content-Type\" as @mType@. Declaring \"Content-Type\" is
+-- mandatory for sending a response body.
+setContentType ∷ MIMEType → Resource ()
+setContentType
+    = setHeader "Content-Type" ∘ A.fromAsciiBuilder ∘ MT.printMIMEType
 
--- | Computation of @'setContentType' mType@ sets the response header
--- \"Content-Type\" to @mType@.
-setContentType :: MIMEType -> Resource ()
-setContentType mType
-    = setHeader (C8.pack "Content-Type") (C8.pack $ show mType)
-
--- | Computation of @'setLocation' uri@ sets the response header
--- \"Location\" to @uri@.
-setLocation :: URI -> Resource ()
+-- |@'setLocation' uri@ declares the response header \"Location\" as
+-- @uri@. You usually don't need to call this function directly.
+setLocation ∷ URI → Resource ()
 setLocation uri
-    = setHeader (C8.pack "Location") (C8.pack $ uriToString id uri $ "")
+    = case A.fromChars uriStr of
+        Just a  → setHeader "Location" a
+        Nothing → abort $ mkAbortion' InternalServerError
+                        $ "Malformed URI: " ⊕ T.pack uriStr
+    where
+      uriStr = uriToString id uri ""
 
--- |Computation of @'setContentEncoding' codings@ sets the response
--- header \"Content-Encoding\" to @codings@.
-setContentEncoding :: [String] -> Resource ()
+-- |@'setContentEncoding' codings@ declares the response header
+-- \"Content-Encoding\" as @codings@.
+setContentEncoding ∷ [CIAscii] → Resource ()
 setContentEncoding codings
-    = do ver <- getRequestVersion
-         let tr = case ver of
-                    HttpVersion 1 0 -> unnormalizeCoding
-                    HttpVersion 1 1 -> id
-                    _               -> undefined
-         setHeader (C8.pack "Content-Encoding") (C8.pack $ joinWith ", " $ map tr codings)
-
--- |Computation of @'setWWWAuthenticate' challenge@ sets the response
--- header \"WWW-Authenticate\" to @challenge@.
-setWWWAuthenticate :: AuthChallenge -> Resource ()
-setWWWAuthenticate challenge
-    = setHeader (C8.pack "WWW-Authenticate") (C8.pack $ show challenge)
-
-
-{- DecidingBody 時に使用するアクション群 -}
-
--- | Computation of @'output' str@ writes @str@ as a response body,
--- and then make the 'Resource' transit to /Done/ state. It is safe to
--- apply 'output' to an infinite string, such as a lazy stream of
--- \/dev\/random.
---
--- Note that 'outputLBS' is more efficient than 'output' so you should
--- use it whenever possible.
-output :: String -> Resource ()
-output str = outputLBS $! L8.pack str
-{-# INLINE output #-}
-
--- | This is mostly the same as 'output' but is more efficient.
-outputLBS :: Lazy.ByteString -> Resource ()
-outputLBS str = do outputChunkLBS str
-                   driftTo Done
-{-# INLINE outputLBS #-}
-
--- | Computation of @'outputChunk' str@ writes @str@ as a part of
--- response body. You can compute this action multiple times to write
--- a body little at a time. It is safe to apply 'outputChunk' to an
--- infinite string.
---
--- Note that 'outputChunkLBS' is more efficient than 'outputChunk' so
--- you should use it whenever possible.
-outputChunk :: String -> Resource ()
-outputChunk str = outputChunkLBS $! L8.pack str
-{-# INLINE outputChunk #-}
-
--- | This is mostly the same as 'outputChunk' but is more efficient.
-outputChunkLBS :: Lazy.ByteString -> Resource ()
-outputChunkLBS wholeChunk
-    = wholeChunk `seq`
-      do driftTo DecidingBody
-         itr <- getInteraction
-         
-         let limit = cnfMaxOutputChunkLength $ itrConfig itr
-         when (limit <= 0)
-                  $ fail ("cnfMaxOutputChunkLength must be positive: "
-                          ++ show limit)
-
-         discardBody <- liftIO $ atomically $
-                        readItr itr itrWillDiscardBody id
-
-         unless (discardBody)
-                    $ sendChunks wholeChunk limit
-
-         unless (L8.null wholeChunk)
-                    $ liftIO $ atomically $
-                      writeItr itr itrBodyIsNull False
-    where
-      -- チャンクの大きさは Config で制限されてゐる。もし例へば
-      -- "/dev/zero" を L8.readFile して作った Lazy.ByteString をそのまま
-      -- ResponseWriter に渡したりすると大變な事が起こる。何故なら
-      -- ResponseWriter は Transfer-Encoding: chunked の時、ヘッダを書
-      -- く爲にチャンクの大きさを測る。
-      sendChunks :: Lazy.ByteString -> Int -> Resource ()
-      sendChunks str limit
-          | L8.null str = return ()
-          | otherwise   = do let (chunk, remaining) = L8.splitAt (fromIntegral limit) str
-                             itr <- getInteraction
-                             liftIO $ atomically $ 
-                                    do buf <- readItr itr itrBodyToSend id
-                                       if L8.null buf then
-                                           -- バッファが消化された
-                                           writeItr itr itrBodyToSend chunk
-                                         else
-                                           -- 消化されるのを待つ
-                                           retry
-                             -- 殘りのチャンクについて繰り返す
-                             sendChunks remaining limit
-
-{-
-
-  [GettingBody からそれ以降の状態に遷移する時]
-  
-  body を讀み終へてゐなければ、殘りの body を讀み捨てる。
-
-
-  [DecidingHeader からそれ以降の状態に遷移する時]
-
-  postprocess する。
-
-
-  [Done に遷移する時]
-
-  bodyIsNull が False ならば何もしない。True だった場合は出力補完す
-  る。
-
--}
-
-driftTo :: InteractionState -> Resource ()
-driftTo newState
-    = newState `seq`
-      do itr <- getInteraction
-         liftIO $ atomically $ do oldState <- readItr itr itrState id
-                                  if newState < oldState then
-                                      throwStateError oldState newState
-                                    else
-                                      do let a = [oldState .. newState]
-                                             b = tail a
-                                             c = zip a b
-                                         mapM_ (uncurry $ drift itr) c
-                                         writeItr itr itrState newState
+    = do ver ← getRequestVersion
+         tr  ← case ver of
+                  HttpVersion 1 0 → return (toAB ∘ unnormalizeCoding)
+                  HttpVersion 1 1 → return toAB
+                  _               → abort $ mkAbortion' InternalServerError
+                                            "setContentEncoding: Unknown HTTP version"
+         setHeader "Content-Encoding"
+             $ A.fromAsciiBuilder
+             $ mconcat
+             $ intersperse (A.toAsciiBuilder ", ")
+             $ map tr codings
     where
-      throwStateError :: Monad m => InteractionState -> InteractionState -> m a
-
-      throwStateError Done DecidingBody
-          = fail "It makes no sense to output something after finishing to output."
-
-      throwStateError old new
-          = fail ("state error: " ++ show old ++ " ==> " ++ show new)
+      toAB = A.toAsciiBuilder ∘ A.fromCIAscii
 
+-- |@'setWWWAuthenticate' challenge@ declares the response header
+-- \"WWW-Authenticate\" as @challenge@.
+setWWWAuthenticate ∷ AuthChallenge → Resource ()
+setWWWAuthenticate = setHeader "WWW-Authenticate" ∘ printAuthChallenge
 
-      drift :: Interaction -> InteractionState -> InteractionState -> STM ()
+-- |Write a chunk in 'Strict.ByteString' to the response body. You
+-- must first declare the response header \"Content-Type\" before
+-- applying this function. See: 'setContentType'
+putChunk ∷ Strict.ByteString → Resource ()
+putChunk = putBuilder ∘ BB.fromByteString
 
-      drift itr GettingBody _
-          = writeItr itr itrReqBodyWasteAll True
-
-      drift itr DecidingHeader _
-          = postprocess itr
-
-      drift itr _ Done
-          = do bodyIsNull <- readItr itr itrBodyIsNull id
-               when bodyIsNull
-                        $ writeDefaultPage itr
-
-      drift _ _ _
-          = return ()
+-- |Write a chunk in lazy 'Lazy.ByteString' to the response body. It
+-- can be safely applied to an infinitely long 'Lazy.ByteString'.
+--
+-- Note that you must first declare the response header
+-- \"Content-Type\" before applying this function. See:
+-- 'setContentType'
+putChunks ∷ Lazy.ByteString → Resource ()
+putChunks = putBuilder ∘ BB.fromLazyByteString